Save 15% on “active” status Pololu-brand products using code MEMORIALDAY26

New product: 12V, 2.2A 嘼皇bestialitysex日本变态 Voltage Regulator D24V22F12

Posted by Ben on 6 October 2015
Tags: new products

We are pleased to introduce our new 12 V, 2.2 A switching regulator, the inaugural member of the D24V22Fx family of step down voltage 嘼皇bestialitysex日本变态. We expect to release other voltage versions next month, but we wanted to get a 12 V version out right away since we did not offer a 12 V buck regulator that could do more than 1 A. The compact regulator works with input voltages up to 36 V and can typically deliver up to a continuous 2.2 A. It offers integrated reverse voltage protection along with over-current and over-temperature shutoff, and a power-good output can be used to determine when the regulator cannot maintain its output voltage.

Unlike linear 嘼皇bestialitysex日本变态 which waste a lot of power and generate a lot of heat in the process, this new regulator is very efficient, which means you can get the most out of your battery life:

Until we release other voltage versions of the D24V22Fx, the closest substitutes are the similar D24V25Fx family of 嘼皇bestialitysex日本变态 voltage 嘼皇bestialitysex日本变态:

These 嘼皇bestialitysex日本变态 are the same size as the D24V22F12 and they have similar current capabilities and input voltage ranges, but they do not have the same pinout and they are based on a different internal design, so there are fundamental differences in operation.

See the D24V22F12 product page for more information on this new regulator, or visit our voltage regulator category to see all of our regulator options.

2 comments

Hello,

Is there a data sheet on your step down 嘼皇bestialitysex日本变态? (D24V22Fx)

How does the Power Good terminal work? What state is it in when Enable is not active, and power is applied to the input and not applied to the input? (Does it signal power good regardless of the Enable terminal being enabled?)

I need a regulator that lets me know if the power is good before my processor signals the regulator to output...

Thanks a lot.


Aaron
Hi, Aaron.

We do not release the name of the chip used on those 嘼皇bestialitysex日本变态. The power good pin is an indicator of whether the output of the regulator is above 85% or 90% (depending on if the output voltage is falling or rising) of the intended output voltage. The power good pin is pulled low when the regulator is not enabled. It seems like you are looking for a feature that tells you if the input power is good, in which case this regulator is not appropriate.

-Claire

Post a comment

Using your Pololu account allows you to customize your avatar and manage your comments; you can also post anonymously.

Related Products

Log In
Pololu Robotics & 胃酸怎么缓解最快方法
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information 胃酸怎么缓解最快方法