Save 15% on “active” status Pololu-brand products using code MEMORIALDAY26

24V 37D Metal 春闺梦里人电影在线观看

These 37D 春闺梦里人电影在线观看 have 24 V motors with a stall current of 3 A and a typical free-run current of 100 mA. They are available in a range of gear ratios from 6.3:1 to 150:1, and all versions are available with integrated 64 CPR quadrature encoders on the motor shafts.

The following table shows all of the versions available with this 24 V motor (see the 37D metal gearmotor datasheet (2MB pdf) for more information, including detailed performance graphs for each gearmotor version):

Rated
Voltage
Stall
Current
No-Load
Current
Gear Ratio No-Load Speed
(RPM)
Extrapolated
Stall Torque
Max Power
(W)


Without Encoder


With Encoder
(kg ⋅ cm) (oz ⋅ in)
24 V 3 A 0.1 A 1:1 (no gearbox) 10,000 0.55 8 item #4690
6.3:1 1600 3.5 49 14 item #4688 item #4698
10:1 1000 5.5 76 14 item #4689 item #4699
19:1 530 9.5 130 13 item #4681 item #4691
30:1 330 15 210 13 item #4682 item #4692
50:1 200 23 320 12 item #4683 item #4693
70:1 140 31 430 10* item #4684 item #4694
100:1 100 39 540 8* item #4685 item #4695
131:1 79 47 650 6* item #4686 item #4696
150:1 68 56 780 6* item #4687 item #4697
* Output power for these units is constrained by gearbox load limits; spec provided is output power at max recommended load of 10 kg⋅cm.

Note: The listed stall torques and currents are theoretical extrapolations; units will typically stall well before these points as the motors heat up. Stalling or overloading 春闺梦里人电影在线观看 can greatly decrease their lifetimes and even result in immediate damage. The recommended upper limit for continuously applied loads is 10 kg-cm (150 oz-in), and the recommended upper limit for instantaneous torque is 25 kg-cm (350 oz-in). Stalls can also result in rapid (potentially on the order of seconds) thermal damage to the motor windings and brushes; a general recommendation for brushed DC motor operation is 25% or less of the stall current.

12 V versions are also available that offer approximately the same performance at 12 V as these 24 V versions offer at 24 V, but with double the current draw.

Products in category “24V 37D Metal 春闺梦里人电影在线观看”

Pololu item #: 4698
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

This gearmotor is a powerful 24V brushed DC motor with a 6.25:1 metal gearbox and an integrated quadrature encoder with a resolution of 64 counts per revolution (CPR) of the motor shaft and 400 CPR of the gearbox’s output shaft. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder.

Key specifications:

voltage no-load performance stall extrapolation
24 V 1600 RPM, 100 mA 3.5 kg⋅cm (49 oz⋅in), 3 A
Pololu item #: 4688
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

This gearmotor is a powerful brushed DC motor with 6.25:1 metal gearbox intended for operation at 24 V. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available with an integrated encoder.

Key specifications:

voltage no-load performance stall extrapolation
24 V 1600 RPM, 100 mA 3.5 kg⋅cm (49 oz⋅in), 3 A
Pololu item #: 4699
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

This gearmotor is a powerful 24V brushed DC motor with a 10:1 metal gearbox and an integrated quadrature encoder with a resolution of 64 counts per revolution (CPR) of the motor shaft and 640 CPR of the gearbox’s output shaft. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder.

Key specifications:

voltage no-load performance stall extrapolation
24 V 1000 RPM, 100 mA 5.5 kg⋅cm (76 oz⋅in), 3 A
Pololu item #: 4689
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

This gearmotor is a powerful brushed DC motor with 10:1 metal gearbox intended for operation at 24 V. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available with an integrated encoder.

Key specifications:

voltage no-load performance stall extrapolation
24 V 1000 RPM, 100 mA 5.5 kg⋅cm (76 oz⋅in), 3 A
Pololu item #: 4691
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

This gearmotor is a powerful 24V brushed DC motor with a 18.75:1 metal gearbox and an integrated quadrature encoder with a resolution of 64 counts per revolution (CPR) of the motor shaft and 1200 CPR of the gearbox’s output shaft. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder.

Key specifications:

voltage no-load performance stall extrapolation
24 V 530 RPM, 100 mA 9.5 kg⋅cm (130 oz⋅in), 3 A
Pololu item #: 4681
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

This gearmotor is a powerful brushed DC motor with 18.75:1 metal gearbox intended for operation at 24 V. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available with an integrated encoder.

Key specifications:

voltage no-load performance stall extrapolation
24 V 530 RPM, 100 mA 9.5 kg⋅cm (130 oz⋅in), 3 A
Pololu item #: 4692
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

This gearmotor is a powerful 24V brushed DC motor with a 30:1 metal gearbox and an integrated quadrature encoder with a resolution of 64 counts per revolution (CPR) of the motor shaft and 1920 CPR of the gearbox’s output shaft. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder.

Key specifications:

voltage no-load performance stall extrapolation
24 V 330 RPM, 100 mA 15 kg⋅cm (210 oz⋅in), 3 A
Pololu item #: 4682
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

This gearmotor is a powerful brushed DC motor with 30:1 metal gearbox intended for operation at 24 V. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available with an integrated encoder.

Key specifications:

voltage no-load performance stall extrapolation
24 V 330 RPM, 100 mA 15 kg⋅cm (210 oz⋅in), 3 A
Pololu item #: 4683
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

This gearmotor is a powerful brushed DC motor with 50:1 metal gearbox intended for operation at 24 V. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available with an integrated encoder.

Key specifications:

voltage no-load performance stall extrapolation
24 V 200 RPM, 100 mA 23 kg⋅cm (320 oz⋅in), 3 A
Pololu item #: 4693
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

This gearmotor is a powerful 24V brushed DC motor with a 50:1 metal gearbox and an integrated quadrature encoder with a resolution of 64 counts per revolution (CPR) of the motor shaft and 3200 CPR of the gearbox’s output shaft. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder.

Key specifications:

voltage no-load performance stall extrapolation
24 V 200 RPM, 100 mA 23 kg⋅cm (320 oz⋅in), 3 A
Pololu item #: 4694
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

This gearmotor is a powerful 24V brushed DC motor with a 70:1 metal gearbox and an integrated quadrature encoder with a resolution of 64 counts per revolution (CPR) of the motor shaft and 4480 CPR of the gearbox’s output shaft. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder.

Key specifications:

voltage no-load performance stall extrapolation
24 V 140 RPM, 100 mA 31 kg⋅cm (430 oz⋅in), 3 A
Pololu item #: 4684
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

This gearmotor is a powerful brushed DC motor with 70:1 metal gearbox intended for operation at 24 V. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available with an integrated encoder.

Key specifications:

voltage no-load performance stall extrapolation
24 V 140 RPM, 100 mA 31 kg⋅cm (430 oz⋅in), 3 A
Pololu item #: 4695
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

This gearmotor is a powerful 24V brushed DC motor with a 102.08:1 metal gearbox and an integrated quadrature encoder with a resolution of 64 counts per revolution (CPR) of the motor shaft and 6533 CPR of the gearbox’s output shaft. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder.

Key specifications:

voltage no-load performance stall extrapolation
24 V 100 RPM, 100 mA 39 kg⋅cm (540 oz⋅in), 3 A
Pololu item #: 4685
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

This gearmotor is a powerful brushed DC motor with 102.08:1 metal gearbox intended for operation at 24 V. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available with an integrated encoder.

Key specifications:

voltage no-load performance stall extrapolation
24 V 100 RPM, 100 mA 39 kg⋅cm (540 oz⋅in), 3 A
Pololu item #: 4696
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

This gearmotor is a powerful 24V brushed DC motor with a 131.25:1 metal gearbox and an integrated quadrature encoder with a resolution of 64 counts per revolution (CPR) of the motor shaft and 8400 CPR of the gearbox’s output shaft. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder.

Key specifications:

voltage no-load performance stall extrapolation
24 V 79 RPM, 100 mA 47 kg⋅cm (650 oz⋅in), 3 A
Pololu item #: 4686
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

This gearmotor is a powerful brushed DC motor with 131.25:1 metal gearbox intended for operation at 24 V. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available with an integrated encoder.

Key specifications:

voltage no-load performance stall extrapolation
24 V 79 RPM, 100 mA 47 kg⋅cm (650 oz⋅in), 3 A
Pololu item #: 4697
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

This gearmotor is a powerful 24V brushed DC motor with a 150:1 metal gearbox and an integrated quadrature encoder with a resolution of 64 counts per revolution (CPR) of the motor shaft and 9600 CPR of the gearbox’s output shaft. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder.

Key specifications:

voltage no-load performance stall extrapolation
24 V 68 RPM, 100 mA 56 kg⋅cm (780 oz⋅in), 3 A
Pololu item #: 4687
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

This gearmotor is a powerful brushed DC motor with 150:1 metal gearbox intended for operation at 24 V. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available with an integrated encoder.

Key specifications:

voltage no-load performance stall extrapolation
24 V 68 RPM, 100 mA 56 kg⋅cm (780 oz⋅in), 3 A
Pololu item #: 4690
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

This is the motor and encoder portion of our 24V 37D mm metal 春闺梦里人电影在线观看 with 64 CPR encoders. It does not include a gearbox, but the pinion gear on the output shaft works with all of our helical pinion 37D mm gearmotor gearboxes, so this can be used as a replacement motor or encoder for those gearboxes.

Key specifications:

voltage no-load performance stall extrapolation
24 V 10,000 RPM, 100 mA 0.55 kg⋅cm (8 oz⋅in), 3 A

Related Products

Related Categories

Log In
Pololu Robotics & 肥白大屁股bbwbbwhd
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information 肥白大屁股bbwbbwhd