Motion Control Modules » Brushed DC Motor 婷婷成人丁香七月综合激情 » Motoron Motor 婷婷成人丁香七月综合激情 »
Motoron M2S Dual High-Power Motor 婷婷成人丁香七月综合激情 for Arduino
The Motoron M2S family of dual high-power motor controller shields makes it easy to independently control two bidirectional, brushed DC motors with an Arduino or compatible board, such as the A-Star 32U4 Prime. Unlike most of our motor drivers and motor driver shields, the Motoron does not require any PWM outputs or timers on your Arduino. Instead, the Arduino communicates with the Motoron using I²C, so only two I/O lines are needed. Four types are available so you can pick the one with the appropriate operating voltage range and output current capabilities for your project:
 Motoron M2S18v20 Dual High-Power Motor Controller Shield for Arduino |
 Motoron M2S18v18 Dual High-Power Motor Controller Shield for Arduino |
 Motoron M2S24v16 Dual High-Power Motor Controller Shield for Arduino |
 Motoron M2S24v14 Dual High-Power Motor Controller Shield for Arduino |
|
|---|---|---|---|---|
| Absolute max motor supply voltage: |
30 V | 40 V | ||
| Recommended max nominal battery voltage: |
18 V | 28 V | ||
| Max continuous current per channel: |
20 A | 18 A | 16 A | 14 A |
| Available versions: | ||||
Each of the four types above is available in three versions to provide different options for the through-hole 婷婷成人丁香五月综合激情: they can be purchased as an assembled product with stackable headers and terminal blocks soldered in, as a kit with 婷婷成人丁香五月综合激情 included but not soldered in, or as a standalone board without 婷婷成人丁香五月综合激情.
Compare all products in this category
Products in category “Motoron M2S Dual High-Power Motor 婷婷成人丁香七月综合激情 for Arduino”
|
|
|
|
|
supply outlook |
| Status: Active and Preferred | |
|
|
The Motoron M2S18v18 Dual High-Power Motor Controller Shield for Arduino makes it easy to control two high-power DC motors from an Arduino or Arduino-compatible board through an I²C interface. The M2S18v18 supports motor supply voltages from 6.5 V to 30 V and can deliver continuous output currents up to 18 A per motor. This version ships with soldered stackable headers and terminal blocks.
Stacking disclaimer: The included terminal blocks are taller than the headers, so this version is intended to be used by itself or at the top of a stack. For stackable shields, we recommend getting the kit version and soldering wires to the board instead of the terminal blocks.
| Pololu item #: 5037 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
The Motoron M2S18v18 Dual High-Power Motor Controller Shield for Arduino makes it easy to control two high-power DC motors from an Arduino or Arduino-compatible board through an I²C interface. The M2S18v18 supports motor supply voltages from 6.5 V to 30 V and can deliver continuous output currents up to 18 A per motor. This version ships with a variety of header pin and terminal block options included but not soldered in.
| Pololu item #: 5038 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
The Motoron M2S18v18 Dual High-Power Motor Controller Shield for Arduino makes it easy to control two high-power DC motors from an Arduino or Arduino-compatible board through an I²C interface. The M2S18v18 supports motor supply voltages from 6.5 V to 30 V and can deliver continuous output currents up to 18 A per motor. This version is just the motor controller by itself, without any header pins or terminal blocks included.
|
|
|
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
The Motoron M2S24v14 Dual High-Power Motor Controller Shield for Arduino makes it easy to control two high-power DC motors from an Arduino or Arduino-compatible board through an I²C interface. The M2S24v14 supports motor supply voltages from 6.5 V to 40 V and can deliver continuous output currents up to 14 A per motor. This version ships with soldered stackable headers and terminal blocks.
Stacking disclaimer: The included terminal blocks are taller than the headers, so this version is intended to be used by itself or at the top of a stack. For stackable shields, we recommend getting the kit version and soldering wires to the board instead of the terminal blocks.
The Motoron M2S24v14 Dual High-Power Motor Controller Shield for Arduino makes it easy to control two high-power DC motors from an Arduino or Arduino-compatible board through an I²C interface. The M2S24v14 supports motor supply voltages from 6.5 V to 40 V and can deliver continuous output currents up to 14 A per motor. This version ships with a variety of header pin and terminal block options included but not soldered in.
| Pololu item #: 5041 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
The Motoron M2S24v14 Dual High-Power Motor Controller Shield for Arduino makes it easy to control two high-power DC motors from an Arduino or Arduino-compatible board through an I²C interface. The M2S24v14 supports motor supply voltages from 6.5 V to 40 V and can deliver continuous output currents up to 14 A per motor. This version is just the motor controller by itself, without any header pins or terminal blocks included.
| Pololu item #: 5042 | |
|
|
supply outlook |
|
|
|
|
|
|
The Motoron M2S18v20 Dual High-Power Motor Controller Shield for Arduino makes it easy to control two high-power DC motors from an Arduino or Arduino-compatible board through an I²C interface. The M2S18v20 supports motor supply voltages from 6.5 V to 30 V and can deliver continuous output currents up to 20 A per motor. This version ships with soldered stackable headers and terminal blocks.
Stacking disclaimer: The included terminal blocks are taller than the headers, so this version is intended to be used by itself or at the top of a stack. For stackable shields, we recommend getting the kit version and soldering wires to the board instead of the terminal blocks.
The Motoron M2S18v20 Dual High-Power Motor Controller Shield for Arduino makes it easy to control two high-power DC motors from an Arduino or Arduino-compatible board through an I²C interface. The M2S18v20 supports motor supply voltages from 6.5 V to 30 V and can deliver continuous output currents up to 20 A per motor. This version ships with a variety of header pin and terminal block options included but not soldered in.
The Motoron M2S18v20 Dual High-Power Motor Controller Shield for Arduino makes it easy to control two high-power DC motors from an Arduino or Arduino-compatible board through an I²C interface. The M2S18v20 supports motor supply voltages from 6.5 V to 30 V and can deliver continuous output currents up to 20 A per motor. This version is just the motor controller by itself, without any header pins or terminal blocks included.
|
Pololu item #:
|
|
|
|
supply outlook |
| Status: Active and Preferred | |
|
|
|
The Motoron M2S24v16 Dual High-Power Motor Controller Shield for Arduino makes it easy to control two high-power DC motors from an Arduino or Arduino-compatible board through an I²C interface. The M2S24v16 supports motor supply voltages from 6.5 V to 40 V and can deliver continuous output currents up to 16 A per motor. This version ships with soldered stackable headers and terminal blocks.
Stacking disclaimer: The included terminal blocks are taller than the headers, so this version is intended to be used by itself or at the top of a stack. For stackable shields, we recommend getting the kit version and soldering wires to the board instead of the terminal blocks.
The Motoron M2S24v16 Dual High-Power Motor Controller Shield for Arduino makes it easy to control two high-power DC motors from an Arduino or Arduino-compatible board through an I²C interface. The M2S24v16 supports motor supply voltages from 6.5 V to 40 V and can deliver continuous output currents up to 16 A per motor. This version ships with a variety of header pin and terminal block options included but not soldered in.
The Motoron M2S24v16 Dual High-Power Motor Controller Shield for Arduino makes it easy to control two high-power DC motors from an Arduino or Arduino-compatible board through an I²C interface. The M2S24v16 supports motor supply voltages from 6.5 V to 40 V and can deliver continuous output currents up to 16 A per motor. This version is just the motor controller by itself, without any header pins or terminal blocks included.
Related categories
Home | Forum | Blog | Support | Ordering Information | Lists | 婷婷成人丁香七月综合激情 | BIG Order Form | About | Contact
© 2001–2026 Pololu Corporation
