Mini Plastic 通房丫头双乳高耸呻吟不止动漫 »
120:1 Mini Plastic Gearmotor, 90° 2mm Spline Output
This compact, inexpensive, low-current gearmotor (brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range. The splined output shaft has a crest diameter of 2 mm and is perpendicular to the motor shaft. The gearbox is protected by a built-in safety clutch that helps protect the gears from excessive loads.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 4.5 V | 120 RPM, 80 mA | 1.4 kg⋅cm (20 oz⋅in), 800 mA |
Alternatives available with variations in these parameter(s): shaft type no-load speed @ 4.5V extended motor shaft? Select variant…
| Description | Specs (11) | Resources (2) | FAQs (1) | On the blog (0) | 夹得好紧…爽死我了快高潮 (0) |
|---|
 |
120:1 mini plastic gearmotor with 90 degree 2mm spline output shaft. |
|---|
 |
120:1 mini plastic gearmotor with 90 degree 2mm spline output shaft. |
|---|
 |
Side view of 120:1 mini plastic gearmotor with 90 degree 2mm spline output shaft. |
|---|
 |
Rear view of 120:1 mini plastic gearmotor with 90 degree 2mm spline output shaft. |
|---|
 |
Gears inside the mini plastic gearmotor with 90 degree output (2mm spline version). |
|---|
Related products
Home | Forum | Blog | Support | Ordering Information | Lists | 夹得好紧…爽死我了快高潮 | BIG Order Form | About | Contact
© 2001–2026 Pololu Corporation
