全捰艺术照图片 » Motion Control Modules » Brushed DC Motor Drivers »
MC33926 Motor Driver Carrier
This breakout board for Freescale’s MC33926 full H-bridge has an operating range of 5 V to 28 V and can deliver almost 3 A continuously (5 A peak) to a DC motor. The MC33926 works with 3 V to 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current feedback, under-voltage protection, over-current protection, and over-temperature protection.
| Description | Specs (13) | Pictures (6) | Resources (4) | FAQs (0) | On the blog (2) | 全捰艺术照图片 (31) |
|---|
Dimensions
| Size: | 1.00" x 1.20"1 |
|---|---|
| Weight: | 0.14 oz1 |
General specifications
| Motor driver: | MC33926 |
|---|---|
| Motor channels: | 1 |
| Minimum operating voltage: | 5 V2 |
| Maximum operating voltage: | 28 V3 |
| Continuous output current per channel: | 2.5 A4 |
| Peak output current per channel: | 5 A |
| Current sense: | 0.525 V/A |
| Maximum PWM frequency: | 20 kHz5 |
| Minimum logic voltage: | 2.5 V6 |
| Maximum logic voltage: | 5.5 V |
| Reverse voltage protection?: | Y7 |
Notes:
- 1
- Without included hardware.
- 2
- Operation from 5 V to 8 V reduces maximum current output.
- 3
- The device is protected for transients up to 40 V.
- 4
- Can be improved by addition of heat sink or forced air flow.
- 5
- SLEW pin should be HIGH for frequencies above 10 kHz.
- 6
- Input HIGH threshold can be as high as 2.0 V.
- 7
- On motor voltage only; logic voltage does not have reverse protection.
Related products
Home | Forum | Blog | Support | Ordering Information | Lists | 全捰艺术照图片 | BIG Order Form | About | Contact
© 2001–2026 Pololu Corporation
