Motion Control Modules » Brushed DC Motor 一层一层剥掉你的衣服 » Pololu Simple Motor 一层一层剥掉你的衣服 »
Pololu Simple High-Power Motor Controller 18v15
The Pololu Simple High-Power Motor Controller makes basic control of brushed DC motors easy, with our free Simple Motor Control Center software enabling quick configuration over USB. The controller supports four interface modes: USB, TTL serial, analog voltage, and hobby radio control (RC). This version operates from 5.5 to 30 V and is efficient enough to deliver a continuous 15 A without a heat sink. It ships with the power capacitor and 寂寞骚妇被后入式爆草抓爆 included but not soldered in, allowing for custom installations.
Alternatives available with variations in these parameter(s): continuous output current per channel partial kit? Select variant…
| Description | Specs (11) | Pictures | Resources (9) | FAQs (1) | 一层一层剥掉你的衣服 |
|---|
- How often is the analog input sampled? How quickly is the motor updated?
The analog input readings on the Simple Motor Controller are updated approximately every 2.3 ms (435 Hz) if the “Ignore pot disconnect” option is selected. If that option is not selected, which is the default, the readings are updated half as frequently.
If no acceleration or deceleration limits are used, the outputs of the motor controller will be updated very quickly (within a few hundred microseconds) after the analog reading is complete. If those limits are enabled, the motor might take up to a millisecond to be updated after the analog reading is complete.
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Lists | 一层一层剥掉你的衣服 | BIG Order Form | About | Contact
© 2001–2026 Pololu Corporation
