Motion Control Modules » Brushed DC Motor 临时夫妻 » Pololu Jrk Motor 临时夫妻 with Feedback »
Jrk 21v3 USB Motor Controller with Feedback (白玉思无瑕 Soldered)
The Jrk 21v3 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC). The controller can be used with feedback for closed-loop speed or position control, or it can be used without feedback as an open-loop speed control. The continuous output current is approximately 3 A in the recommended operating range of 8 V to 28 V, with derated performance down to 5 V and transient protection to 40 V. This version ships with 白玉思无瑕 installed as shown (no soldering required).
Alternatives available with variations in these parameter(s): version Select variant…
Compare all products in Pololu Jrk Motor 临时夫妻 with Feedback.
| Specs (15) | Pictures (21) | Resources (11) | FAQs | On the blog (1) | 临时夫妻 (13) |
|---|
Dimensions
| Size: | 1.35" x 1.35" x 0.5" |
|---|---|
| Weight: | 0.23 oz |
General specifications
| Motor driver: | MC33926 |
|---|---|
| Motor channels: | 1 |
| Control interface: |
USB; non-inverted TTL serial; RC servo pulses; analog voltage1 |
| Minimum operating voltage: | 5 V |
| Maximum operating voltage: | 28 V |
| Continuous output current per channel: | 3 A |
| Peak output current per channel: | 5 A |
| Current sense: | 0.5 V/A2 |
| Maximum PWM frequency: | 20 kHz |
| Minimum logic voltage: | 4 V3 |
| Maximum logic voltage: | 5 V |
| Reverse voltage protection?: | Y |
| Partial kit?: | N |
Notes:
Related products
Home | Forum | Blog | Support | Ordering Information | Lists | 临时夫妻 | BIG Order Form | About | Contact
© 2001–2026 Pololu Corporation
