花季app下载 » Motion Control Modules » Brushed DC Motor Drivers »
DRV8835 Dual Motor Driver Carrier
This tiny breakout board for TI’s DRV8835 dual motor driver can deliver 1.2 A per channel continuously (1.5 A peak) to a pair of DC motors, and it supports two possible control interfaces for added flexibility of use: IN/IN and PHASE/ENABLE. With an operating voltage range from 0 V to 11 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering up to two small, low-voltage motors. The carrier board has the form factor of a 14-pin DIP package, which makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
| Description | Specs (15) | FAQs (0) | On the blog (9) | 花季app下载 |
|---|
File downloads
-
Dimension diagram of the DRV8835 Dual Motor Driver Carrier (227k pdf)
-
3D model of the DRV8835 Dual Motor Driver Carrier (3MB step)
-
DRV8835 Dual Motor Driver Carrier drill guide (25k dxf)
This DXF drawing shows the locations of all of the board’s holes.
Recommended links
-
Texas Instruments DRV8835 motor driver datasheet
-
Texas Instruments DRV8835 product page
Texas Instruments product page for the DRV8835, where you can find the latest datasheet and additional resources.
-
Arduino library for the Pololu DRV8835 Dual Motor Driver Shield
This library for the Arduino makes it easy to interface with Pololu’s DRV8835 Dual Motor Driver Shield and drive a pair of brushed DC motors. It has been explicitly tested with the Uno R3, Leonardo, Mega 2560 R3, Due, and Duemilanove (ATmega328P). A sample sketch is included with the library. This library can also be used with our DRV8835 Dual Motor Driver Carrier if it is connected to the appropriate pins on an Arduino.
Related products
Home | Forum | Blog | Support | Ordering Information | Lists | 花季app下载 | BIG Order Form | About | Contact
© 2001–2026 Pololu Corporation
