AltIMU-10 v3 Gyro, Accelerometer, Compass, and Altimeter (L3GD20H, LSM303D, and LPS331AP Carrier)
The Pololu AltIMU-10 v3 is an inertial measurement unit (IMU) and altimeter that features the same L3GD20H gyro and LSM303D accelerometer and magnetometer as the MinIMU-9 v3, and adds an LPS331AP digital barometer. An I²C interface accesses ten independent pressure, rotation, acceleration, and magnetic measurements that can be used to calculate the sensor’s altitude and absolute orientation. The board operates from 2.5 to 5.5 V and has a 0.1″ pin spacing.
Clearance: This board is being replaced by the newer AltIMU-10 v5.
| Description | Pictures (7) | Resources (20) | FAQs (1) | 又长又粗又大又硬起来了 (0) |
|---|
 |
Pololu AltIMU-10 v3 gyro, accelerometer, compass, and altimeter, bottom view with dimensions. |
|---|
 |
Pololu AltIMU-10 v3 gyro, accelerometer, compass, and altimeter pinout. |
|---|
 |
Pololu AltIMU-10 v3 gyro, accelerometer, compass, and altimeter with included optional headers. |
|---|
 |
Two Pololu AltIMU-10 v3 modules in a breadboard. |
|---|
 |
Side-by-side comparison of the MinIMU-9 v3 with the AltIMU-10 v3. |
|---|
 |
AltIMU-10 v3 schematic diagram. |
|---|
 |
Visualization of AHRS orientation calculated from MinIMU-9 readings. |
|---|
Related products
Home | Forum | Blog | Support | Ordering Information | Lists | 又长又粗又大又硬起来了 | BIG Order Form | About | Contact
© 2001–2026 Pololu Corporation
