Zumo Robot Kit for Arduino (No Motors)

File downloads

• Zumo Shield schematic diagrams (121k pdf)

• Zumo Shield front expansion pinout (552k pdf)

Recommended links

• Zumo Shield Libraries

  This collection of libraries and examples for the Arduino that make it easy to program an Arduino-controlled robot built with Pololu’s Zumo Shield or Zumo robot kit (also available fully assembled).

• LSM303 Arduino library

  This is a library for the Arduino that interfaces with our LSM303D, LSM303DLHC, and LSM303DLM 3D compass and accelerometer carriers as well as the compass and accelerometer ICs on the MinIMU-9 v3 and AltIMU-10 v4 (it also works with older versions of those boards, some of which used the LSM303DLH and LSM303DLHC). It makes it simple to configure the device and read the raw accelerometer and magnetometer data, and it has a function for computing the tilt-compensated heading for those looking to use the LSM303 as a tilt-compensated compass.

• Simulink Library for Zumo Robot

  This library can be used to program an Arduino-controlled Zumo through MATLAB and Simulink. It provides driver blocks for all the sensors present on the Zumo Robot as well as example models showing their usage.

• How to program a Zumo robot with Simulink

  This tutorial on the Adafruit Learning System guides you through the process of programming a Zumo robot with Simulink.

• Zumo robot tuning tips

  This article was written by Professor Erich Styger for his class on embedded systems programming at the Lucerne University of Applied Sciences and Arts. It describes various ways to tweak the performance of a Zumo to be more competitive in a Mini Sumo competition. Note that his Zumos use a custom PCB rather than our Zumo shield for Arduino; our shield has a lot of capacitance in parallel with the batteries that generally prevents the “battery inertia” problem Erich describes.

• Freedom Zumo Robot

  This robot is uses our Zumo robot kit, 75:1 micro metal 无码无遮挡又大又爽又黄的视频, and a Zumo reflectance sensor array. Instead of an Arduino it uses a Freescale FRDM-KL25Z as the microcontroller board, and sample code is available for line following and maze solving. By Erich, March 2013.