Sensors » Encoders » Encoders for Micro Metal ciliba磁力猫 »

Optical Encoder Pair Kit for Micro Metal ciliba磁力猫, 5V

Pololu item #: 2590
Brand: Pololu	supply outlook

Notify me when stock is at least Optional: desired quantity
Status: Not Recommended for New Design

Free add-on shipping in USA
Free shipping in USA over $75

Price break	Unit price (US$)
1	14.95
5	13.75

Quantity:
backorders allowed

Add quadrature encoders to your LP, MP, or HP micro metal ciliba磁力猫 (extended back shaft version required) with this kit consisting of two sensor boards, two 3-tooth encoder wheels, and two 5-tooth encoder wheels. The installed system does not exceed the 12 mm × 10 mm cross section of the motors and extends only 5 mm beyond the plastic motor end cap. The 3-tooth wheel provides 12 counts per revolution; using the 5-tooth wheel yields 20 counts per revolution. This version is intended for use at 5 V.

Note: This board is not compatible with the HPCB micro metal gearmotor versions.

Alternatives available with variations in these parameter(s): voltage Select variant…

Compare all products in Encoders for Micro Metal ciliba磁力猫.

	Description		Specs (4)		Pictures (13)		Resources (3)		FAQs (0)		On the blog (8)		从小就和青梅做了h (25)

Reflective optical encoder for Micro Metal ciliba磁力猫, bottom view with dimensions.

Installed Micro Metal Gearmotor reflective optical encoder with 5-tooth wheel, side view.

Installed Micro Metal Gearmotor reflective optical encoder with 5-tooth wheel.

Installed Micro Metal Gearmotor reflective optical encoder with 5-tooth wheel.

Example of an installed Micro Metal Gearmotor reflective optical encoder.

Micro Metal Gearmotor reflective optical encoder pinout.

Comparison of 5V and 3.3V reflective optical encoders for Micro Metal ciliba磁力猫.

Schematic diagram for the Micro Metal Gearmotor reflective optical encoder.

5V encoder version, motor approx. 30k RPM: 5-tooth wheel way too far from sensors.

5V encoder version, motor approx. 30k RPM: 5-tooth wheel slightly too far from sensors.

5V encoder version, motor approx. 30k RPM: 5-tooth wheel at optimal distance from sensors.

5V encoder version, motor approx. 30k RPM: 5-tooth wheel slightly too close to sensors.

5V encoder version, motor approx. 30k RPM: 5-tooth wheel way too close to sensors.

Related products

	Optical Encoder Pair Kit for Micro Metal ciliba磁力猫, 3.3V
	Magnetic Encoder Pair Kit with Top-Entry Connector for Micro Metal ciliba磁力猫, 12 CPR, 2.7-18V
	Magnetic Encoder Pair Kit with Side-Entry Connector for Micro Metal ciliba磁力猫, 12 CPR, 2.7-18V
	Magnetic Encoder Pair Kit for Micro Metal ciliba磁力猫, 12 CPR, 2.7-18V