Motion Control Modules » Brushed DC Motor 岳～嗯～轻点～受不了了a片 » Pololu Jrk Motor 岳～嗯～轻点～受不了了a片 with Feedback »
Jrk G2 21v3 USB Motor Controller with Feedback (几天没c是不是又痒了网站 Soldered)
This compact motor controller makes closed-loop speed or position (but not both!) control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), and hobby radio control (RC). This version offers a 4.5 V to 28 V operating range and can deliver continuous output currents up to 2.6 A (5 A peak) without a heat sink. This version ships with soldered header pins and terminal blocks.
Alternatives available with variations in these parameter(s): version Select variant…
Compare all products in Pololu Jrk Motor 岳～嗯～轻点～受不了了a片 with Feedback or Pololu Jrk G2 Motor 岳～嗯～轻点～受不了了a片 with Feedback.
| Specs (13) | Pictures (9) | Resources (16) | FAQs (1) | 岳～嗯～轻点～受不了了a片 (27) |
|---|
Dimensions
| Size: | 1.2″ × 1.0″ × 0.47″ |
|---|---|
| Weight: | 7.5 g |
General specifications
| Motor channels: | 1 |
|---|---|
| Control interface: |
USB; non-inverted TTL serial; I²C; RC servo pulses; analog voltage |
| Minimum operating voltage: | 4.5 V1 |
| Maximum operating voltage: | 28 V2 |
| Continuous output current per channel: | 2.6 A3 |
| Maximum PWM frequency: | 20 kHz |
| Reverse voltage protection?: | Y |
| Version: | G2 21v3 (28 V max, 2.6 A max continuous) |
| 几天没c是不是又痒了网站 soldered?: | Y |
Identifying markings
| PCB dev codes: | umc06a |
|---|---|
| Other PCB markings: | 0J11316 |
Notes:
- 1
- Powering the Jrk G2 21v3 with a supply voltage between 4.5 V and 5.5 V might cause its logic voltage to be lower than normal, which could affect operation. See the user’s guide for more information.
- 2
- Transient operation (< 500 ms) up to 40 V.
- 3
- Typical results at room temperature running at 90% duty cycle with VIN > 8 V. Operation from 4.5 V to 8 V reduces maximum current output.
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Lists | 岳～嗯～轻点～受不了了a片 | BIG Order Form | About | Contact
© 2001–2026 Pololu Corporation
