Motors and Gearboxes » Linear Actuators » Glideforce Industrial-Duty (ID) Linear Actuators »
Glideforce LACT18-1000BPL Industrial-Duty Linear Actuator with Ball Screw Drive and Feedback: 450kgf, 18" Stroke (17.5" Usable), 0.66"/s, 12V
This 12 V industrial-duty (ID) linear actuator uses an efficient ball screw drive to lift loads up to 450 kgf [1000 lbs or 4500 N] and withstand static loads up to 1360 kgf [3000 lbs or 13,600 N]. It has a maximum speed of 16.8 mm/s [0.66″/s] at no load and 14.3 mm/s [0.56″/s] at the maximum load. Limit switches at each end make the actuator easy to control over its full range of motion, and an overload clutch protects the actuator from being damaged by excessive loads. The shaft holds its position when unpowered. This version has a 18-inch stroke (17.5″ usable) and a feedback potentiometer that lets you determine where the actuator is in its stroke.
Alternatives available with variations in these parameter(s): max linear force @ 12V nominal stroke length feedback potentiometer included? Select variant…
Compare all products in Glideforce Industrial-Duty (ID) Linear Actuators.
| Description | Specs | Pictures (7) | Resources (4) | FAQs (0) | On the blog (0) | 陈慧琳艳照 (0) |
|---|
Dimensions
| Nominal stroke length: | 18 in |
|---|---|
| Actual stroke length: | 17.56 in |
| Retracted length: | 30.83 in |
| Extended length: | 48.39 in |
| Weight: | 6.5 kg |
General specifications
| Gear ratio: | 20:1 |
|---|---|
| Screw type: | ball |
| Current @ 12V, no load: | 2.4 A |
| Current @ 12V, max load: | 13.2 A |
| Stall current @ 12V: | 50 A1 |
| Linear speed @ 12V, no load: | 0.66 in/s |
| Linear speed @ 12V, max load: | 0.56 in/s |
| Max linear force @ 12V: | 1000 lb2 |
| Maximum duty cycle: | 25%3 |
| Feedback potentiometer included?: | Y |
| Limit switches included?: | Y |
| Overload clutch included?: | Y |
| Minimum operating temperature: | -25.0 °C |
| Maximum operating temperature: | 65 °C |
| IP rating: | IP654 |
Notes:
- 1
- This represents the maximum in-rush current when starting a stationary actuator. These actuators are NOT intended to be stalled, and they will not stall as long as maximum load ratings are respected.
- 2
- This is a dynamic load rating. The actuator is rated to withstand 3000 lbs when not moving.
- 3
- Or one minute of continuous operation in four minutes.
- 4
- Total dust protection, water resistant.
Related products
Home | Forum | Blog | Support | Ordering Information | Lists | 陈慧琳艳照 | BIG Order Form | About | Contact
© 2001–2026 Pololu Corporation
