伊人色综合久久天天小片 » Motion Control Modules » Brushed DC Motor Drivers »
MP6550 Single Brushed DC Motor Driver Carrier
This tiny breakout board for the MPS MP6550 motor driver offers a wide operating voltage range of 1.8 V to 22 V and can deliver a continuous 1.7 A (2.5 A peak) to a single brushed DC motor. The MP6550 has built-in current sensing and current limiting as well as protection against under-voltage, over-current, and over-temperature conditions. The carrier board also adds reverse-voltage protection up to 20 V.
| Description | Specs (16) | Pictures (11) | Resources | FAQs (0) | On the blog |
|---|
Dimensions
| Size: | 0.5″ × 0.6″ |
|---|---|
| Weight: | 0.5 g1 |
General specifications
| Motor driver: | MP6550 |
|---|---|
| Motor channels: | 1 |
| Minimum operating voltage: | 1.8 V |
| Maximum operating voltage: | 22 V |
| Continuous output current per channel: | 1.7 A |
| Peak output current per channel: | 2.5 A2 |
| Current sense: | 0.2 V/A3 |
| Maximum PWM frequency: | 100 kHz |
| Minimum logic voltage: | 1.8 V |
| Maximum logic voltage: | 4.9 V4 |
| Reverse voltage protection?: | Y5 |
| Header pins soldered?: | N |
Identifying markings
| PCB dev codes: | md44a |
|---|---|
| Other PCB markings: | 0J13903 |
Notes:
- 1
- Without included hardware.
- 2
- Default current limit determined by on-board configuration resistor.
- 3
- Determined by on-board configuration resistor.
- 4
- The MP6550 datasheet specifies 5 V as the absolute maximum voltage on any control input, but we do not recommend operation with a nominally 5 V logic voltage.
- 5
- Note: Reverse voltage protection only works up to 20 V.
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Lists | 伊人色综合久久天天小片 | BIG Order Form | About | Contact
© 2001–2026 Pololu Corporation
