Sensors » Current Sensors » ACS37100 TMR Current Sensor Carriers »
ACS37100LMATR-050B3 TMR Current Sensor Compact Carrier -50A to +50A, 3.3V
This is the compact version of a simple carrier for Allegro’s ACS37100LMATR-025B3 TMR-based, electrically isolated current sensor that offers a high 10 MHz bandwidth with high accuracy, low noise, and typical response times of 50 ns. The typical primary current path resistance of the sensor IC is 1.2 mΩ.
| Part Suffix | Range | Supply Voltage | Sensitivity | Zero Point | Size | PCB layers |
|---|---|---|---|---|---|---|
| 050B3 | ±50 A (bidirectional) | 3 V to 3.6 V | 26.4 mV/A | 1.65 V | 0.8″×1.1″ | 2 |
Alternatives available with variations in these parameter(s): current range Select variant…
Compare all products in ACS37100 TMR Current Sensor Carriers.
| Specs (12) | Pictures (8) | Resources (5) | FAQs (0) | On the blog | 毛片内射久久久一区 (0) |
|---|
File downloads
-
ACS37100 datasheet (2MB pdf)
Note: This version of the datasheet incorrectly states that the fault output is open drain when the IC really has an integrated 10 kΩ pull-up on that pin, and the voltages listed in the VOC table on page 14 are half of what they should be (e.g. 100% is 1.322V, not 0.661V).
-
Dimension diagram of the ACS37100 Current Sensor Carriers (358k pdf)
-
3D model of the ASC37100 Current Sensor Compact Carriers (4MB step)
-
Drill guide for the ASC37100 Current Sensor Compact Carriers (233k dxf)
This DXF drawing shows the locations of all of the board’s holes.
Recommended links
-
Allegro product page for the ACS37100 10 MHz XtremeSense™ TMR Current Sensor with Integrated Overcurrent FAULT Detection and Output Voltage Reference
Allegro product page for the ACS37100.
Related products
Home | Forum | Blog | Support | Ordering Information | Lists | 毛片内射久久久一区 | BIG Order Form | About | Contact
© 2001–2026 Pololu Corporation
