Motion Control Modules » Brushed DC Motor Drivers » Pololu High-Power Motor Drivers »
Pololu G2 High-Power Motor Driver 24v30 CS
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power brushed DC motor. The 1.9″ × 1.7″ board supports a wide 6.5 V to 40 V voltage range and is efficient enough to deliver up to around 30 A continuous without a heat sink. Additional features include reverse-voltage protection, basic current limiting, and an on-board current sensor that provides a direct measurement of the motor current.
Compare all products in Pololu High-Power Motor Drivers or Single-Channel G2 and H2 High-Power Motor Drivers.
| Description | Specs (14) | Pictures (15) | Resources (3) | FAQs (1) | On the blog (0) | 啊哼～可以随时c的世界 (4) |
|---|
Dimensions
| Size: | 1.7″ × 1.9″ × 0.37″ |
|---|---|
| Weight: | 12 g |
General specifications
| Motor channels: | 1 |
|---|---|
| Minimum operating voltage: | 6.5 V |
| Maximum operating voltage: | 40 V1 |
| Continuous output current per channel: | 30 A |
| Peak output current per channel: | 100 A2 |
| Current sense: | 0.0132 V/A |
| Maximum PWM frequency: | 100 kHz |
| Minimum logic voltage: | 1.8 V |
| Maximum logic voltage: | 5.5 V |
| Reverse voltage protection?: | Y |
Identifying markings
| PCB dev codes: | md49a |
|---|---|
| Other PCB markings: | 0J15978 |
Notes:
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Lists | 啊哼～可以随时c的世界 | BIG Order Form | About | Contact
© 2001–2026 Pololu Corporation
