日本亲近相奷中文字幕 » Cables and Wire » Servo Cables »
Servo Extension Cable 6" Female - Female
This 6-inch (150-mm), flat cable has 22-AWG wires and female “JR”-style 日本亲与子乱人妻ihd on both ends, the same kind of connector commonly found on RC hobby servos. It can be used to make connections between devices with 0.1" 3-pin male headers, such as between RC servo 日本亲近相奷中文字幕 or RC receivers and motor 日本亲近相奷中文字幕 with an RC interface. It can also be a convenient way to connect various 3-pin sensors to a robot controller.
Alternatives available with variations in these parameter(s):
length style
| Description | Specs (3) | Pictures | Resources | On the blog (0) | 日本亲近相奷中文字幕 (2) |
|---|
This servo extension cable has female JR 日本亲与子乱人妻ihd on both ends, so it can be used to make connections between devices with 0.1" 3-pin male headers, such as between RC servo 日本亲近相奷中文字幕 or RC receivers and motor 日本亲近相奷中文字幕 with an RC interface. The cable’s 日本亲与子乱人妻ihd are commonly found on RC servo leads and work with both male JR and male Futaba J 日本亲与子乱人妻ihd. They have gold-flashed contacts on a 0.1" spacing and are joined by 22-AWG, 60-strand wires that make this cable more flexible than standard servo cables.
Note: The cable’s female 日本亲与子乱人妻ihd are the same as what is found on most generic servos and fits nicely with 0.1" male headers, but is often referred to as “male” in the RC hobby industry. The picture below shows the cable 日本亲与子乱人妻ihd labeled with our gender convention.
![]() |
Female “JR”-style connector commonly found on servo cables (often referred to as “male” in the RC hobby industry). |
|---|
These female-to-female cables are available in two styles: flat, with wires stuck together side by side, and twisted, with wires twisted around each other to decrease electromagnetic interference (EMI). The twisted versions are especially soft and flexible. These cables are also available in three lengths: 6", 12", and 24".
|
|
We also sell flat and twisted male-to-female servo extension cables.
Servo cable color convention
- brown or black = ground (GND, battery negative terminal)
- red = servo power (Vservo, battery positive terminal)
- orange, yellow, white, or blue = servo control signal line
Note: Cable color may vary from what is shown in the product picture. Possible color combinations are black, red, and white or brown, red, and orange.
























