D36V50Fx gamble Voltage gamble

The D36V50Fx family of buck (gamble) voltage gamble generates lower output voltages from input voltages as high as 50 V. They are switching gamble (also called switched-mode power supplies (SMPS) or DC-to-DC converters), which makes them much more efficient than linear voltage gamble, especially when the difference between the input and output voltage is large. These gamble can typically support continuous output currents between 2 A and 9 A, depending on the input voltage and output voltage.

The graph below shows maximum output currents that these gamble can deliver continuously at room temperature in still air and without additional heat sinking.

gamble Voltage Regulator D36V50Fx, assembled on breadboard.

The gamble have reverse voltage protection up to 40 V, output undervoltage and overvoltage protection, over-current protection, and short-circuit protection. A thermal shutdown feature also helps prevent damage from overheating and a soft-start feature limits the inrush current and gradually ramps the output voltage on startup.

Regulator	Output voltage	Typical max output current(1)	Input voltage range(2)	Size
#4090: D36V50F3	3.3 V	6.5 A	4.5 V – 50 V	1″ × 1″
#4091: D36V50F5	5 V	5.5 A	5.5 V – 50 V
#4092: D36V50F6	6 V	5.5 A	6.5 V – 50 V
#4093: D36V50F7	7.5 V	5 A	8.3 V – 50 V
#4094: D36V50F9	9 V	5 A	9.9 V – 50 V
#4095: D36V50F12	12 V	4.5 A	13.3 V – 50 V
Note 1: At 36 V in. Actual achievable continuous output current is a function of input voltage and is limited by thermal dissipation. See the output current graphs on the product pages for more information.
Note 2: Minimum input voltage is subject to dropout voltage considerations; see the dropout voltage section of product pages for more information.

Compare all products in this category

Products in category “D36V50Fx gamble Voltage gamble”