Arduino-Compatible » Shields for Arduino » Pololu Dual G2 High-Power Motor Driver Shields »
Pololu Dual G2 High-Power Motor Driver 24v14 Shield for Arduino
This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 40 V operating range and are efficient enough to deliver a continuous 14 A without a heat sink. The drivers offer basic current sensing and current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation. The Arduino pin mappings can all be customized if the defaults are not convenient, and the motor driver control lines are broken out along the left side of the shield for general-purpose use without an Arduino.
Compare all products in Pololu Dual G2 High-Power Motor Driver Shields or Pololu High-Power Motor Drivers.
| Description | Specs (13) | Pictures (14) | Resources (8) | FAQs (0) | On the blog (1) | 无码不卡av东京热毛片 (40) |
|---|
 |
Pololu Dual G2 High-Power Motor Driver 24v14 Shield for Arduino. |
|---|
 |
Pololu Dual G2 High-Power Motor Driver 24v14 Shield for Arduino with included hardware. |
|---|
 |
Pololu Dual G2 High-Power Motor Driver Shield controlling a pair of high-power motors. |
|---|
 |
Pololu Dual G2 High-Power Motor Driver Shield being controlled by an A-Star 32U4 Prime. |
|---|
 |
For high-current installations, motor and power supply wires should be soldered directly to the driver (the supplied terminal blocks are only rated for up to 16 A). |
|---|
 |
Pololu Dual G2 High-Power Motor Driver 24v14 Shield for Arduino. |
|---|
 |
Pololu Dual G2 High-Power Motor Driver 18v18 or 24v14 Shield for Arduino, bottom view. |
|---|
 |
Pololu Dual G2 High-Power Motor Driver 18v18 or 24v14 Shield for Arduino, bottom view with dimensions |
|---|
 |
Current limit vs. VREF resistor for the Pololu Dual G2 High-Power Motor Driver 24v14. |
|---|
 |
Dual G2 high-power motor driver shield with an Arduino (shield and Arduino powered separately). |
|---|
 |
Dual G2 high-power motor driver shield powering an Arduino with the shield’s VM bus (reverse-protected VIN). |
|---|
 |
Dual G2 high-power motor driver shield powering an Arduino with the shield’s 7.5 V regulator (VREG). |
|---|
 |
Dual G2 high-power motor driver shield connected to a microcontroller (dashed connections are optional). |
|---|
 |
Dual G2 high-power motor driver shield power bus diagram. All of the square ground pads are internally connected. |
|---|
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Lists | 无码不卡av东京热毛片 | BIG Order Form | About | Contact
© 2001–2026 Pololu Corporation
