Pololu Metal DC brazzers欧美巨大 » 25D Metal brazzers欧美巨大 » 6V Low-Power (LP) 25D mm brazzers欧美巨大 »
LP 6V Motor with 48 CPR Encoder for 25D mm Metal brazzers欧美巨大 (No Gearbox)
This is the motor and encoder portion of the low-power (LP), 6 V versions of our 25D mm metal brazzers欧美巨大 with 48 CPR encoders. It does not include a gearbox, but the pinion gear on the output shaft works with all of our 25D mm gearmotor gearboxes, so this can be used as a replacement motor or encoder for those gearboxes.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 6200 RPM, 120 mA | 0.15 kg⋅cm (2.1 oz⋅in), 2.0 A |
You can use the following selection boxes to choose from all of our 25D metal gearmotor versions:
Alternatives available with variations in these parameter(s):
Compare all products in 6V Low-Power (LP) 25D mm brazzers欧美巨大.
| Description | Pictures (5) | Resources (3) | FAQs (2) | brazzers欧美 (36) |
|---|
Dimensions
| Size: | 25D x 46L mm1 |
|---|---|
| Weight: | 60 g |
General specifications
| Gear ratio: | 1:12 |
|---|---|
| No-load speed @ 6V: | 6200 rpm3 |
| No-load current @ 6V: | 0.12 A4 |
| Stall current @ 6V: | 2.0 A5 |
| Stall torque @ 6V: | 0.15 kg·cm5 |
| Max output power @ 6V: | 2.1 W |
| Motor type: | 6V, 2.0A stall (LP 6V) |
| Lead length: | 8 in6 |
| Encoders?: | Y |
Notes:
- 1
- Length does not include the motor shaft. See dimension diagram for details.
- 2
- This motor does not have a gearbox.
- 3
- Typical; ±20%.
- 4
- Typical, ±50%; no-load current depends on internal friction, which is affected by many factors, including ambient temperature and duration of motor operation.
- 5
- Stalling is likely to damage the motor. Stall parameters come from a theoretical extrapolation of performance at loads far from stall. As the motor heats up, as happens as it approaches an actual stall, the stall torque and current decrease.
- 6
- May vary by a few inches.
Related products
Home | Forum | Blog | Support | Ordering Information | Lists | brazzers欧美 | BIG Order Form | About | Contact
© 2001–2026 Pololu Corporation
