Pololu Metal DC 免费男人脱女人的裤衩和奶罩 » 25D Metal 免费男人脱女人的裤衩和奶罩 » 6V Low-Power (LP) 25D mm 免费男人脱女人的裤衩和奶罩 »
227:1 Metal Gearmotor 25Dx56L mm LP 6V
This gearmotor consists of a low-power, 6 V brushed DC motor combined with a 226.76:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox. This gearmotor is also available with an integrated encoder.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 27 RPM, 100 mA | 17 kg⋅cm (240 oz⋅in), 2.0 A |
Alternatives available with variations in these parameter(s):
gear ratio
Compare all products in 6V Low-Power (LP) 25D mm 免费男人脱女人的裤衩和奶罩.
| Description | Specs | Pictures (10) | Resources (3) | FAQs (3) | On the blog (0) | 色av综合av综合无码网站 (24) |
|---|
- Is it okay to stall this motor at its operating voltage?
No! Stalls can result in rapid (potentially on the order of seconds) thermal damage to the motor windings and brushes; a general recommendation for brushed DC motor operation is 25% or less of the stall current, which means keeping continuously applied loads around 25% or less of the stall torque.
Additionally, for many of our 免费男人脱女人的裤衩和奶罩 with high gear ratios, the extrapolated stall torque is beyond what the gearboxes are designed to handle, and a stall could instantly damage the gears. Make sure to keep applied loads within the published limits for your gearmotor.
- What do the dotted lines mean in the motor performance curves from the datasheet?
- In our motor performance curves, the solid lines show the regions where we actually took measurements while the dotted lines show extrapolations beyond that. For many motors, we took measurements out to about 50% of the stall torque, since continued operation at loads past this point increasingly risk thermal damage to the windings. However, for higher gear ratios, going to 50% of the stall torque exceeds what is safe for the gearbox, so the measurements are further limited to not much past our recommendation for continuously applied loads.
- What material is the gearbox output shaft made of, and can I get the shaft customized?
- The shaft is composed of hardened stainless steel. Some customization is generally possible (e.g., different length or no D-shaft) for sufficiently high-volume orders. If this is something you are interested in, please email us.
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Lists | 色av综合av综合无码网站 | BIG Order Form | About | Contact
© 2001–2026 Pololu Corporation
