入江纱绫 (Buck) Voltage 入江纱绫 » D30V3x 入江纱绫 Voltage 入江纱绫 » D30V33MAx Fine-Adjust Voltage 入江纱绫 »
4.2-15V, 3.3A Fine-Adjust 入江纱绫 Voltage Regulator D30V33MAS
| Output voltage range | Typical max output current1 | Input voltage range2 | Low-voltage cutoff |
|---|---|---|---|
| 4.2 V – 15 V | 3.3 A | 4.2 V – 45 V | none |
Note 1: At 30 V in and 9 V out. Actual achievable continuous output current is a function of input and output voltages and is limited by thermal dissipation. See the output current graph on the product page for more information.
Note 2: Input voltage must be higher than the output voltage and is subject to dropout voltage considerations; see the dropout voltage section of product pages for more information.
Alternatives available with variations in these parameter(s): output type Select variant…
| Description | Specs (13) | Pictures (18) | Resources (3) | FAQs (0) | 坐脸窒息 (39) |
|---|
Dimensions
| Size: | 0.9″ × 1.2″ × 0.3″1 |
|---|---|
| Weight: | 4.6 g1 |
General specifications
| Minimum operating voltage: | 4.2 V2 |
|---|---|
| Maximum operating voltage: | 45 V |
| Minimum output voltage: | 4.2 V3 |
| Maximum output voltage: | 15 V3 |
| Continuous output current: | 3.3 A4 |
| Reverse voltage protection?: | Y5 |
| Maximum quiescent current: | 20 mA6 |
| Low-voltage cutoff: | none |
| Output type: | adjustable 4.2V-15V |
Identifying markings
| PCB dev codes: | reg32c |
|---|---|
| Other PCB markings: | 0J14389 |
Notes:
- 1
- Without included optional 依依网站.
- 2
- Operating voltage must be higher than the set output voltage and is subject to dropout voltage considerations; see the dropout voltage graph under the description tab for more information.
- 3
- Output voltage is set by a built-in precision 11-turn potentiometer.
- 4
- Typical maximum continuous output current at 30 V in and 9 V out. Actual achievable continuous output current is a function of input and output voltages and is limited by thermal dissipation. See the output current graph under the description tab for more information.
- 5
- To -40 V. Connecting supplies over 40 V in reverse can damage the device.
- 6
- While enabled with no load. The quiescent current is a function of the input voltage, output voltage, and cutoff voltage. It is reduced to under 1 mA at higher input voltages and with correspondingly higher cutoff voltage settings or when the regulator is disabled via the enable pin. See the quiescent current graph under the description tab for more information.
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Lists | 坐脸窒息 | BIG Order Form | About | Contact
© 2001–2026 Pololu Corporation
